FacebookTwitter
XNX Honeywell Gas Detector Calibration Guide
When you first purchase your XNX gas detector, you may be unsure of how to set the date and time. This article will give you an overview of the XNX-HART interface, the zero and span calibration, and setting the date and time menu. Whether you are calibrating for a single gas or multiple gases, you’ll be glad you read this guide! It’s easy to calibrate your XNX gas detector and will give you the confidence to start using it right away!
Table of Contents
XNX gas detector
Before installing a new sensor, make sure that the XNX Honeywell gas detector is calibrated properly. You can perform this step by following the steps below. The XNX Universal Transmitter has a General Status Screen. In the General Status Screen, you will find an icon indicating the gas concentration and a warning code. The transmitter will also have a function to restart monitoring when it is interrupted or turned off by the user.
First, perform the Span Calibration. The Span Calibration process will display a message if it has failed. After selecting this screen, you will be returned to the Span Concentration menu. Inhibit mode will prevent actual gas events from being reported. This mode must be reset after testing and maintenance. You must also check the mA settings of the Searchpoint Optima Plus and Searchline Excel gas detectors.
XNX-HART interface
Using the XNX-HART interface for calibrating Honeywell gas detectors is a common process for many companies. Its common interface, spare parts, and ease of operation make it an ideal solution for a number of different applications. Another advantage of this interface is its one-man operation. The local IS-HART terminal port makes it simple for a single person to operate, and local LEDs provide status indications.
The XNX-HART interface allows users to configure Honeywell gas sensors with ease, whether local or over the HART interface. Its configuration menu facilitates convenient setting of alarm levels and provides methods for setting time, units, and other configuration parameters. It also allows you to customize the alarm level. Moreover, Honeywell gas detectors offer methods to calibrate alarm levels, as well as time and units.
XNX-HART set date menu
The XNX-HART set date/time menu for Honeywell gas detector calibration allows you to easily adjust the alarm levels and time of day. You can also use this menu to configure your sensor. If you use a multi-gas sensor, you can also set the target gas here. You can also select a sensor and discard it if it doesn’t work.
To access the XNX-HART set date/time menu for Honeywell gas detector calibration, select the corresponding option on the device’s user interface. You can use switches to move from one option to the next. Next, you can see the available HART/Modbus mode. Choose ‘u’ to activate this feature. Once you’re done, you’ll be presented with a display menu.
XNX-HART zero and span calibration
The XNX-HART universal transmitter represents a breakthrough in the field of gas detection. The transmitter is compatible with Honeywell’s analytics line of industrial fixed gas sensors. Its modular design provides easy integration and user-friendly operation. The calibration process involves plugging in a cable kit and following the manufacturer’s instructions. Once connected, the XNX-HART transmitter can be used to calibrate any Honeywell gas detector.
Calibration involves using a special calibration gas to ensure that the sensor is correctly calibrated. Calibration gas is a pressurized mixture of gases with the exact concentration that the sensor requires. The calibration gas should have a NIST-certified expiration date and be clearly labeled with the concentration of the target gas. The calibration gas is available at specialized gas detector distributors such as Hawk Equipment Services. Before using the calibration gas, read the labels carefully to avoid exposure to toxic gases.
XNX-HART set date format
XNX gas sensors are compatible with HART (HART Communication Foundation) protocol. The protocol provides digital data exchange, which makes it unique among fieldbuses. Using this standard, your Honeywell gas detector can be configured to meet your specific needs. To get started, you can navigate to the configuration menu of your detector. From there, you can configure alarm levels and time and units of measurement.
The XNX-HART transmitter’s Set Date screen allows you to change the date. The date format and language can be selected in the settings menu. The transmitter accepts language changes. If you change the time zone, you will be prompted to reset the transmitter to its original state. For this reason, you should change the date format in your transmitter as well. This will improve the accuracy of your Honeywell gas detector.
